• CEE Publ. 7, standard sheet V, 16 A 250 V ~
• with increased built-in contact protection
• with screw terminals for cores up to 2.5 mm² according to NFC 61-314
• available in the design of the A, CD, LS and SL ranges
• Plug type E

• 16 A / 250 V ~
• with screw terminals for rigid and bare flexible cores up to 2.5 mm² 
• Connection terminals according to DIN VDE 0620
• Supporting frame, claws and claw screws are integrated via earth rail into the protective measure
• available in the design of the AS, A, CD, SL and LS ranges
• Plug type F

• 10 A 250 V ~, L + N + PE
• with spring terminals for cores up to 2.5 mm² according to SEV 1011-1998/IEC 884-1
• for installation in socket in accordance with DIN 49 073
• not suitable for installation in surface caps
• available in the design of the A and LS range
• Plug type J

• Socket 13 A 250 V ~
• 2-pin. + E, with increased built-in contact protection
• British Standard 1363:1995
• With screw terminals for cores of up to 4 mm² according to BS 1363-1
• available in the design of the A and LS ranges
• Plug type G

• Socket 13 A 250 V ~
• 2-pin. + E, with indicator light 2-pin
• with increased built-in contact protection
• British Standard 1363:1995
• With screw terminals for cores of up to 4 mm² according to BS 1363-1
• available in the design of the A and LS ranges
• Plug type G

• 13 A / 250 V ~
• with increased built-in contact protection
• with screw terminals for rigid and flexible cores up to 4 mm²
• for installation in wall box according to DIN 49073
• available in the design of the LS range
• Plug BS 1363 (Type G) and GB 2099-1 (Type I)

• Socket 5A 250 V ~
• with screw terminals for cores of up to 4 mm² according to BS 1363-1
• available in the design of the A and LS ranges
• Plug type M

• 16 A / 250 V ~
• with increased built-in contact protection
• with screw terminals for rigid and flexible cores up to 4 mm²
• available in the design of the A and LS ranges
• Plugs BS 546 5A (Type D) and BS 546 15A (Type M)

• with increased built-in contact protection
• with screw terminals for rigid and flexible cores up to 4 mm²
• available in the design of the A and LS ranges
• Plug types A and I

• Configuration: 5 – 20 R, 2-pin + E, 15 + 20 A 125 V ~
• with screw terminals for cores up to 4 mm² according to US-NEMA
• available in the design of the A, CD and LS ranges
• Plug type B

• Socket 16 A 250 V ~
• with screw terminals for cores up to 2.5 mm² according to CEE 7
• available in the design of the A, CD, LS and SL ranges
• Plug type C

At home, in the office or in public buildings: USB sockets are space-saving all-rounders. For charging mobile devices, they have sockets for the widely used USB plug types A and C and have integrated enhanced contact protection as standard.

In addition to the plug contact system for 2-pole plugs with earth pin, sockets with USB ports are also available for the plug types E and F. For those in a hurry, there are also sockets for both systems with a single USB port and the JUNG Quick Charge^® function.

The JUNG USB chargers for type A and type C USB sockets ensure clear conditions everywhere. Matching the JUNG switch ranges, they integrate themselves ideally into the electrical installation and are thoroughly puristic: The screwless snap-on cover closes flush with the frame.

Sockets with pilot lights provide real added value. In corridors or entrance areas, they set effective lighting accents and are extremely practical signposts in the dark.

Stylish hotel design can be achieved with shaver sockets matching the JUNG switch ranges. They are available for the US NEMA-1 and Europlug two-pin connector systems and are equipped as standard with integrated enhanced contact protection.

Ideal for installation in buildings with serial equipment: The plug + go modular system is the clever pre-assembled solution for quick and safe electrical installation with a modular design.